No products
Hull There are 30 products.
9,00 €attachment jib tube (carbone)
CHOOSE YOUR DIAMETERFibercarbone epoxy resin, length 160 mm, useful for class vessels: Footy, Half meter, RG 65, 3/4 meter, 36r, IOM, Oven miss, Phigit, Marblehead, Mini40, 2M, 10r and other boats . This part is made in aluminum molds, baked in my workshops. CHOOSE YOUR DIAMETER
9,00 €
6,00 €attachment jib tube (fiberglass)
CHOOSE YOUR DIAMETERFiberglass epoxy resin, length 160 mm, useful for class vessels: Footy, Half meter, RG 65, 3/4 meter, 36r, IOM, Oven miss, Phigit, Marblehead, Mini40, 2M, 10r and other boats . This part is made in aluminum molds, baked in my workshops. CHOOSE YOUR DIAMETER
6,00 €
30,00 €Carbon fin (rectangular)
CHOOSE YOUR MEASURECarbon fiber epoxy resin, rectangular shape. This part is made in aluminum molds, baked in my workshops. CHOOSE YOUR MEASURE
30,00 €
80,00 €Carbon fin (trapeze)
CHOOSE YOUR MEASURECarbon fiber epoxy resin, trapeze shape. This part is made in aluminum molds, baked in my workshops.CHOOSE YOUR MEASURE
80,00 €- 1,50 €
5,00 €- 8,00 €
Clew tube mainsail (carbon)
CHOOSE YOUR DIAMETERCarbon fiber epoxy. This part is made in aluminum molds, baked in my workshops. CHOOSE YOUR DIAMETER
8,00 € 
6,00 €Clew tube mainsail (fiberglass)
CHOOSE YOUR DIAMETER Fiberglass epoxy. This part is made in aluminum molds, baked in my workshops. CHOOSE YOUR DIAMETER
6,00 €
2,00 €control end
CHOOSE YOUR DIAMETER To control pin 2mm aluminum thread for tube diameter ring or 2, useful for class vessels: Footy, Half meter, RG 65, 3/4 meter, 36r, IOM, 4r, Phigit, Marblehead, Mini40, 2M, 10r, and other boats.
2,00 €
3,50 €Plastic rudder control rudder
CHOOSE YOUR DIAMETER Plastic, metal shaft. to wick Diameter 3 mm, useful for class vessels: Footy, Half meter, RG 65, 3/4 meterDiameter 4mm and 5mm, useful for class vessels: 3/4 meter, 36r, IOM, 4r, Phigit, Marblehead, Mini40, 2M, 10r
3,50 €
3,50 €Receiver pot and accus
White plastic. Diameter 45 mm, useful for class vessels: Footy, Half meter, RG 65, 3/4 meter, 36r, IOM, 4r, Phigit, Marblehead, Mini40, 2M, 10r, and other boats.Diameter 65 mm, useful for class vessels: 36r, IOM, 4r, Phigit, Marblehead, Mini40, 2M, 10r, and other boats.
3,50 €
20,00 €Rudder carbon (rectangulaire)
CHOOSE YOUR MEASURECarbon fiber epoxy resin, rectangular shape. This part is made in aluminum molds, baked in my workshops.CHOOSE YOUR MEASURE
20,00 €
25,00 €Rudder carbon (trapeze rounded base)
CHOOSE YOUR MEASURECarbon fiber epoxy resin base rounded trapezoid shape. This part is made in aluminum molds, baked in my workshops.CHOOSE YOUR MEASURE
25,00 €
20,00 €Rudder carbon (trapeze)
CHOOSE YOUR MEASURE Carbon fiber epoxy resin, trapeze shape. This part is made in aluminum molds, baked in my workshops. CHOOSE YOUR MEASURE
20,00 €
1,67 €Rudder control axis 22
Diameter 2 mm Length 200 mm Sold in 2 useful for boat classes: Footy, Half meter, RG 65, 3/4 meter, 36r, IOM, 4r, Phigit, Marblehead, Mini40, 2M, 10r, and other boats .
1,67 €
5,83 €Rudder spreader aluminum 4 mm
Black anodized aluminum. For wick: Diameter 4 mm, useful for class vessels: 3/4 meter, 36r, IOM, 4r, Phigit, Marblehead, Mini40, 2M, 10r, and other boats.
5,83 €
1,67 €Screed ball 2 mm
To axis of rudder control diameter 2mm, Sold by 2, useful for class vessels: Footy, Half meter, RG 65, 3/4 meter, 36r, IOM,4r, Phigit, Marblehead, Mini40, 2M, 10r and other boats.
1,67 €
1,67 €Screed Ball clevis 2 mm
To axis of rudder control diameter 2mm, Sold by 2, useful for class vessels: Footy, Half meter, RG 65, 3/4 meter, 36r, IOM, 4r, Phigit, Marblehead, Mini40, 2M, 10r and other boats.
1,67 €- 3,00 €
- 25,00 €
Support radio pot (carbone)
CHOOSE YOUR MEASURESepoxy resin carbon fiber. This part is made in aluminum molds, baked in my workshops. CHOOSE YOUR MEASURES
25,00 € - 20,00 €
Support radio pot (fiberglass)
CHOOSE YOUR MEASURESepoxy fiberglass. This part is made in aluminum molds, baked in my workshops. CHOOSE YOUR MEASURES
20,00 € 
18,00 €Swing tube, inside 18 mm
Balestron tube for receiving bearingsMade of carbon, in aluminum molds
18,00 €- 11,00 €
Tube rudder (carbon)
CHOOSE YOUR DIAMETER epoxy carbon. Length 70 mm. Supplied with teflon tube diameter 5/3 mm. CHOOSE YOUR DIAMETER
11,00 € 
8,00 €Tube rudder (fiber glass)
CHOOSE YOUR DIAMETER epoxy fiberglass. Length 70 mm. Supplied with teflon tube diameter 5/3 mm. CHOOSE YOUR DIAMETER
8,00 €- 37,50 €
Well drift and mast 10111
Carbon fiber epoxy resin derived thickness 10 mm Mat 11 mm, useful for class vessels: Marblehead, Mini40, 2M, 10r and other boats. This part is made in aluminum molds, baked in my workshops.
37,50 € 
29,17 €Well drift and mast 10140
Fiber glass epoxy resin, thickness 10 mm Mat drift 14mm, useful for class vessels: 36r, IOM, 4r, Phigit, Marblehead, Mini40, 2M, 10r and other boats. This part is made in aluminum molds, baked in my workshops.
29,17 €- 37,50 €
Well drift and mast 10141
Carbon fiber epoxy resin derived 10mm thickness 14 mm Mat useful for class vessels: Marblehead, Mini40, 2M, 10r and other boats.
37,50 € - 37,50 €
Well drift and mast 8111
Carbon fiber epoxy resin derived thickness 8 mm Mat 11 mm, useful for class vessels: Marblehead, Mini40, 2M, 10r and other boats. This part is made in aluminum molds, baked in my workshops.
37,50 € 
29,17 €Well drift and mast 8140
Fiber glass epoxy resin, Thickness 8 mm drift Mat 14mm, useful for class vessels: 36r, IOM, 4r, Phigit, Marblehead, Mini40, 2M, 10r and other boats. This part is made in aluminum molds, baked in my workshops.
29,17 €- 37,50 €
Well drift and mast 8141
Carbon fiber epoxy resin derived 8mm thickness 14 mm Mat useful for class vessels: Marblehead, Mini40, 2M, 10r and other boats.
37,50 €